In addition to our diverse proportioner product line, we are pleased to custom design and build a system to meet your specific requirements. Whether you need to control access to the proportioner, or wish to make installation simple, choose from one of the following custom built board or cabinet systems.

Here are a few of the systems we currently offer:

Custom Cabinet Systems

System	Description	Downloads
Food Processing Mixing System Part #0161	7 GPM. Dual Injection. Mounted in an 18x18 lockable SST enclosure, and includes a pressure regulator with gauge, 3 way water diversion valve, tee water filter, mixing chamber, SST bulkhead fittings, SST compression fittings and complete with plumbing attachments, check valves, and a special 881 Outlet Fitting.	Schematic Print
Fountain Solution Mixing Station Part #0162	Mounted in an 18x18 lockable SST enclosure, and includes a pressure regulator with gauge, tee water filter, mixing chamber, SST bulkhead fittings, complete plumbing with special 881 outlet fitting.	Schematic Print
Part #0181	Mounted in an 18x18 lockable SST enclosure, and includes a pressure regulator with no gauge, tee water filter, static mixer, SST bulkhead fittings and complete with plumbing attachments.	Schematic Print
Two-Pump Fountain Solution Mixing System Part #030	7 GPM. Single Injection Dual Pump System Vertical Mount. Mounted in a 24x24 lockable SST enclosure with by-pass plumbing to run either single or dual injection. Mixing chamber, bulkhead fittings and complete with plumbing attachments.	Schematic Print
Drawing/Stamping Lubricants Part #031	7 GPM. Model #6850 Hydroblend Proportioner mounted in a 21x21 lockable SST enclosure. Includes an on/off valve, water pressure regulator with gauge preset to 10 psi. Tee water filter, SST bulkhead fittings and complete with plumbing attachments.	Schematic Print

 

Custom Board Systems

System	Description	Downloads
Two-Pump with By-Pass Part #032	7 GPM Single Injection Dual Pump System. (2) 8 oz. Pumps - HDPE Pump Head - FS Seal Package, Vertical Mount. Mounted in a 24x30 SST Enclosure with By-Pass plumbing to run either proportioner, as well as bulkhead fittings and complete with plumbing attachments.	Schematic Print
1:1 Dilution System Part #056	7 GPM Continuous Injection Dual Pump System - (1) 85 oz. Variable Pump, (1) 85 oz. Fixed Ratio Pump, Vertical Mount. Mounted on a poly board, including On/Off Valve, water pressure regulator and water T-Filter, complete with plumbing attachments. This system is designed to run open to the atmosphere with a minimum 1.0 inch I.D. discharge line. Deviation from this set-up will restrict the pump's flow, causing the pump not to cycle correctly.	Schematic Print
1:1 Dilution Systems with By-Pass Part #057	7 GPM Continuous Injection Dual Pump System - (1) 85 oz. Fixed Ratio Lube Style Pump, (1) 85 oz. Variable Pump, Vertical Mount. Mounted on a poly board, with by-pass plumbing to run either single or dual injection. It also comes with a water pressure regulator, water T-Filter, and complete with plumbing attachments. This system is designed to run open to the atmosphere with a minimum 1.0 inch I.D. discharge line. Deviation from this set-up will restrict the pump's flow, causing the pump not to cycle correctly.	Schematic Print
Teat Dip Mixing Station Part #061	7 GPM. 6.1 ounce/gallon Fixed Ratio, Dual Proportioner mounted on a poly board, with an on/off valve, water filter, SST shelf, mixing chamber, check valves and complete with plumbing attachments.	Schematic Print
Part #065	Vertically Mounted on a poly board, and includes a tee water filter, PVC remote/downstream injection check valve, remote injection cross, and complete with plumbing attachments.	Schematic Print
Part #065HV	High Volume (25 GPM). Vertically mounted on a poly board with PVC remote/downstream injection check valve and complete with plumbing attachments.	Schematic Print
Silicone Mixing System Part #067	7 GPM Hydroblend Proportioner vertically mounted on a poly board, with a static mixer, mixing chamber, and complete with plumbing attachments.	Schematic Print
Drawing/Stamping Lubricants Part #086	7 GPM. 6850 Hydroblend Proportioner mounted vertically on a poly board and includes an on/off valve, inline water pressure regulator with gauge preset to 15 psi, tee water filter, 3/4 FNPT PVC union and complete with plumbing attachments.	Schematic Print
DrawingStamping Lubricants Part #087	7 GPM. Mounted vertically on a poly board and includes an on/off valve, inline water pressure regulator with gauge preset to 15 psi, tee water filter, mixing chamber, 3/4 FNPT PVC union and complete with plumbing attachments.	Schematic Print
Air Powered Proportioner Teat Dip Part #091	Air Driven, Fixed Ratio, Dual 10oz/gallon Hydroblend Proportioner horizontally mounted on a SST shelf, an on/off valve, preset pressure regulator, Kynar/PVDF check valves and complete with plumbing attachments and fittings.	Schematic Print
Air Powered Proportioner Teat Dip Part #092	Air Driven, Fixed Ratio, Dual 10oz/gallon Hydroblend Proportioner horizontally mounted on a poly board with an anodized aluminum shelf, on/off valve, preset pressure regulator, Kynar/PVDF check valves and complete with plumbing attachments and fittings.	Schematic Print
Air Powered Proportioner Teat Dip Part #093	Air Driven, Fixed Ratio, Dual 10oz/gallon Hydroblend Proportioner horizontally mounted with preset pressure regulator and fittings.	Schematic Print
Conveyor Lubricant Mixing Station Part #IS3	7 GPM. Horizontal Mount. Mounted on a SST shelf 12x11x13 long with water filter, 4/40 GPH-70 psi flow meter, complete with 3/8" NPT plumbing attachments and fittings.	Schematic Print
Conveyor Lubricant Mixing Station Part #LS1	7 GPM. Horizontal Mount. Mounted on a SST shelf 12x12x20 long with water filter, pressure regulator with gauge, mixing chamber, and complete with 3/8" NPT plumbing attachments and fittings.	Schematic Print

 

Don't see what you are looking for? Call our Customer Service department at (208) 375-5000 to speak with someone about a "custom" system.