208.375.5000
info@hydroblend.com
Fluid Powered Chemical Dispensing Systems
High Volume (25 GPM) Product Line
| Model | Max Oz | Ratio | Percent | Max Flow | Pressure | Inlet/Outlet | Weight | Downloads |
|---|---|---|---|---|---|---|---|---|
| HV6002-A-V | 0.22 oz | 1:580-1:5,800 | 0.15-0.01% | 25 GPM
94 LPM |
10-75 PSI
0.6-5 bar |
3/4"
NPT |
22bs
10kg |
Model Specs
Operating Manual Dimensional Print |
| HV6004-A-V | 0.44 oz | 1:290-1:2,900 | 0.35-0.03% | 25 GPM
94 LPM |
10-75 PSI
0.6-5 bar |
3/4"
NPT |
22bs
10kg |
Model Specs
Operating Manual Dimensional Print |
| HV6008-A-V | 0.88 oz | 1:145-1:1,400 | 0.65-0.06% | 25 GPM
94 LPM |
10-75 PSI
0.6-5 bar |
3/4"
NPT |
22bs
10kg |
Model Specs
Operating Manual Dimensional Print |
| HV6017-A-V | 1.70 oz | 1:75-1:750 | 1.30-0.13% | 25 GPM
94 LPM |
10-75 PSI
0.6-5 bar |
3/4"
NPT |
24bs
11kg |
Model Specs
Operating Manual Dimensional Print |
| HV6035-A-V | 3.50 oz | 1:36-1:360 | 2.70-0.25% | 25 GPM
94 LPM |
10-75 PSI
0.6-5 bar |
3/4"
NPT |
24bs
11kg |
Model Specs
Operating Manual Dimensional Print |
| HV6050-A-V | 5 oz | 1:26-1:260 | 3.70-0.35% | 25 GPM
94 LPM |
10-75 PSI
0.6-5 bar |
3/4"
NPT |
24bs
11kg |
Model Specs
Operating Manual Dimensional Print |
| HV6080-A-V | 8 oz | 1:16-1:160 | 5.80-0.60% | 25 GPM
94 LPM |
10-75 PSI
0.6-5 bar |
3/4"
NPT |
24bs
11kg |
Model Specs
Operating Manual Dimensional Print |
| HV6090-A-V | 9 oz | 1:14-1:140 | 6.70-0.70% | 25 GPM
94 LPM |
10-75 PSI
0.6-5 bar |
3/4"
NPT |
24bs
11kg |
Model Specs
Operating Manual Dimensional Print |
| HV6140-A-V | 14 oz | 1:9-1:90 | 10.00-1.00% | 25 GPM
94 LPM |
10-75 PSI
0.6-5 bar |
3/4"
NPT |
29lbs
13kg |
Model Specs
Operating Manual Dimensional Print |
| HV6200-A-V | 20 oz | 1:6-1:60 | 13.50-1.60% | 25 GPM
94 LPM |
10-75 PSI
0.6-5 bar |
3/4"
NPT |
30lbs
13kg |
Model Specs
Operating Manual Dimensional Print |
| HV6360-A-V | 36 oz | 1:3-1:30 | 26.80-3.20% | 25 GPM
94 LPM |
10-75 PSI
0.6-5 bar |
3/4"
NPT |
45lbs
20kg |
Model Specs
Operating Manual Dimensional Print |
Notes
1. The first section of the model number denotes the High Volume (25 GPM) series pump and the maximum ounces injected per gallon of water.
2. The next section denotes the material used in the pump head (i.e. "A" stands for an Acrylic pump head.)
3. The final section denotes the seal package used in the pump (i.e. "V" stands for Viton seals.)
Alternative Pump Head Materials:
- "A" - Acrylic (standard)
- "PVC" - Polyvinylchloride
- "HDPE" - High Density Polyethylene
- "K" Kynar/PVDF
Alternative Seal Combinations:
- "V" - Viton (standard)
- "E" - EPDM
- "TFE" - Teflofluoroethylene
- "TTE" - Teflofluoroethylene
- "FS" Fountain Solution
- "PA" Peracetic Acid
Alternative Chemical Cylinder:
- 316 SST
- Hastelloy C
Additional Options:
- "DMAC" - Hot Water Specific Machined Endplates
- "DI" - Dual Injection
- "TI" - Triple Injection
- "NPT" - National Pipe Thread Adapters
Included Accessories:
- Mounting Feet, Suction Hose, Weighted Strainer/Foot Valve, Operation Manual